Back to blog

Google Ads Channel Prioritization: High vs Low Priority Setup Guide (and the February 2027 Display Deadline)

How Google Ads channel prioritization and budget allocation work, how each bid strategy reacts, and what to set before Display Expansion migrates in February 2027.

DetectivePPC·3 days ago·12 min read

Last verified: 2026-11-18, against Google's help page About channel prioritization and budget allocation, the Google Ads Editor version 2.14 release notes and the Google Ads & Commerce Blog post Guide your campaign spending with new priority and allocation features (Oct 14, 2026). The feature is still rolling out, so your account may not show it yet.

The Brief

  • What it is: you can now mark channels (Google Search, Search partners, the Google Display Network, and "Google channels" in PMax and Demand Gen) as High or Low priority, and give Low priority channels an optional daily budget allocation %.
  • The catch: Google says channel prioritization "has no effect when your campaign isn't limited by budget." In that case only the budget allocation % does anything.
  • The deadline: starting February 2027, every Search campaign with Display Expansion on migrates automatically. To keep today's behavior, Google says to set the Display Network to Low priority with a 50% budget allocation.
  • The audit: list Search campaigns with the Display Network on, check which ones are limited by budget, decide per campaign whether Display and Search partners earn their spend, then set priorities at the account level and override only where needed.

For years, Search partners and the Display Network were an on/off question. Many audit checklists treat "Display Network on in a Search campaign" as a finding by default. Channel prioritization changes that: you can keep a channel switched on, put it behind Google Search in the queue, and cap what it can take from the daily budget. That's a real control, but it only works the way you expect if you understand when it applies and when it quietly doesn't.

How channel prioritization works

Google's help page describes two priority levels, set per channel:

LevelWhat Google says it does
High priority"Google AI prioritizes spend on High priority channels (within your target if you use Target CPA or Target ROAS) before distributing any remaining budget to Low priority channels." All channels are High priority by default.
Low priority"Google AI aims to spend on Low priority channels after your High priority channels." Use it "for channels you value less instead of opting out."

You can set priorities at three levels: the account (a default per campaign type), a shared budget, or a single campaign. Account defaults apply to every eligible campaign of that type unless a shared budget or campaign overrides them.

Which channels you can prioritize, by campaign type

Per Google, controls became progressively available starting October 15, 2026:

Campaign typeChannels you can setBudget allocation % supported?
SearchGoogle Search, Search partners, Google Display NetworkYes
ShoppingGoogle Search, Search partnersYes
Performance MaxGoogle channels, Search partners, Google Display NetworkYes
Demand GenGoogle channels, Google Display NetworkNo (priority only)

In Performance Max and Demand Gen, Search, YouTube, Maps, Gmail and Discover are grouped together as "Google channels," so you can't prioritize YouTube separately from Search inside PMax. Google's own suggestion if you need that granularity: use Search and Demand Gen campaigns, which let you opt out of each supported channel individually.

Budget allocation: the part that actually caps spend

For a Low priority channel, you can enter a daily budget allocation percentage. Four details matter in audits:

  1. It's a percentage of the campaign's average daily budget, not of actual spend. Google's example: 5% on a $1,000 average daily budget means it "will aim to keep spend on that channel at or below $50 per day."
  2. It's best effort. Google says "this isn't a guarantee, and daily spend on that channel may occasionally exceed your budget allocation," including on days the campaign spends more than its average daily budget.
  3. It resets daily. Unspent or overspent amounts don't carry over.
  4. 0% means off. "If you set a Low priority channel's budget allocation to 0%, Google won't spend on that channel."

On shared budgets, the allocation applies to the shared budget as one pool across every campaign using it.

The rule most people will miss: "limited by budget"

This is the line we'd put at the top of every client explanation. From Google's help page:

"Channel prioritization has no effect when your campaign isn't limited by budget, but any budget allocation you set still applies."

So the priority label only changes anything when there's competition for budget. Here's how Google describes each bid strategy:

Bid strategyNot limited by budgetLimited by budget
Target CPA / Target ROAS / Target CPCPriority doesn't change spend distribution. Budget allocations on Low priority channels still apply.High priority channels spend first, within target. If more High priority spend would miss the target, budget shifts to Low priority channels "when they can deliver conversions at your target," subject to any allocation.
Maximize Conversions / Maximize Conversion Value(Budget is the constraint by design)High priority channels spend first. If budget can't be fully spent there, the rest goes to Low priority channels.
Maximize Clicks / Manual CPC / Target Impression Share(Same pattern)High priority channels spend first, remainder to Low priority.

What that means in practice:

  • A tCPA or tROAS campaign that isn't limited by budget won't change behavior just because you set Display to Low priority. If you want to restrain Display there, you need the budget allocation %.
  • A Maximize Conversions campaign with a tight budget is where priority does the most work: Search gets funded first, partners and Display get what's left.
  • Low priority isn't "off." If High priority channels can't absorb the budget, the remainder flows to Low priority channels. If you truly want zero, use 0% or opt out where the campaign type allows it.

The February 2027 Display Expansion deadline

This is the part with a date attached. Google's help page, under "Changes to Display Expansion on Search Campaigns":

  • Starting February 2027, all Search campaigns with Display Expansion enabled "will automatically migrate to channel prioritization and budget allocation."
  • Once that happens, "the current spend allocation setup will go away, and you may see a shift in channel spending between Google Search, Search partners, and the Google Display Network."
  • To keep your current configuration, set the Google Display Network to "Low priority" with a 50% daily budget allocation (best effort).
  • Target Impression Share: as part of this change, "GDN will no longer serve on Search campaigns utilizing the Target Impression Share bid strategy."
  • If you set channel priorities before February 2027, the new settings "apply to these campaigns right away and replace current Display Expansion budget behavior."

That last point is easy to miss. Changing the setting early isn't a dry run; it takes over from the old behavior immediately. Until you touch it (or until February 2027), Search campaigns with the Display Network on that haven't set priorities keep the current Display Expansion behavior.

The audit: 7 checks before February

1. Inventory every Search campaign with the Display Network on

Campaigns → Settings → Networks. Note the bid strategy and whether the campaign shows a "Limited by budget" status. This is the list the February migration touches.

2. Decide whether Display earns its place, per campaign

Segment campaign performance by network (the "Network (with search partners)" segment) over a period long enough to cover a full conversion cycle, and judge Display on your primary conversions, not All conversions. If your conversion goals are messy, fix them first: see our primary vs secondary conversion actions audit. Three outcomes:

  • Display converts at or near target: keep it, set Low priority, and choose an allocation % that matches what you're comfortable spending there.
  • Display doesn't convert: set allocation to 0% or turn the Display Network off.
  • You want today's behavior, no surprises: Low priority + 50%, per Google.

3. Check Target Impression Share campaigns separately

If a Search campaign uses Target Impression Share with the Display Network on, Google says GDN will stop serving there after the change. Usually that's fine (brand campaigns rarely need Display), but flag it so a shift in spend doesn't come as a surprise.

4. Make the same decision for Search partners

Search partners now has a middle ground too. If you opted out years ago, Google explicitly pitches Low priority + a small allocation as a way to test back in. If you test, keep the allocation small and judge it on primary conversions. If partners is on today and underperforming, either cap it or turn it off.

5. Set account defaults first, then override

Google's instructions: Account settings → "Channel Prioritization" card → choose the campaign type → assign High or Low priority per channel → (optional) set allocation % on Low priority channels → Save. For exceptions: Campaigns → select the campaign → Settings → expand "Channel Prioritization" → "Use campaign-level settings" → assign tiers → Save. Two gotchas:

  • You can't set it from a manager (MCC) account. It has to be set in each client account or at the campaign level, which matters if you manage many accounts. Google Ads Editor 2.14 now supports the setting, which can speed up the work inside each account.
  • Campaign-level settings on a shared budget apply to every campaign sharing that budget.

6. Watch for setups where it doesn't apply

From Google's limitations list:

  • Campaign total budgets: channel prioritization only works with campaign total budgets in Demand Gen. Other campaign types using total budgets ignore it.
  • Shared budgets must contain identical campaign types (all Search or all Shopping) for the settings to apply.
  • Experiments: supported in custom experiments, but multi-campaign shared budgets aren't, and all channels in those experiments are treated as the same priority tier.
  • Tools: the help page says you can manage it in Google Ads or Search Ads 360, with API and Editor support "coming soon." Editor has since caught up: the Google Ads Editor 2.14 release notes say Editor "now supports channel prioritization and budget caps," which should make bulk edits easier (the notes don't say which campaign types or levels are covered). The help page still lists Google Ads API support as coming soon, so plan on Editor or the UI, not API scripts, for now.

7. Monitor the first two weeks after any change

Setting an allocation below what a channel spends today will shift spend (Google says so directly). Batch the changes, annotate the date, and compare spend by network week over week. Because allocation is best effort and resets daily, look at the trend over several days rather than a single day's overage. This is the kind of before-and-after drift an automated monitoring setup is built to catch.

How DetectivePPC flags this

DetectivePPC's audit includes a Network & Campaign Type Breakdown, a Budget Allocation Analysis, Campaign & Account Settings checks and a Display deep dive (placements, viewability, frequency). Use those findings to build the February migration list and to judge each network before you pick a priority or an allocation %.

Access is read-only, so an audit never changes your network or channel settings.

Start your free investigation today

A scored case file for your Google Ads account in around 5 minutes.

Where channel prioritization fits in a full audit

Network settings sit in the settings stage of our step-by-step Google Ads audit, right after tracking. The order matters: if conversion tracking is contaminated, your Display and partner performance numbers are too, and you'll set the wrong priorities with confidence.

Verdict

PriorityActionImpactEffort
1List every Search campaign with the Display Network on (the February 2027 migration list)HighLow
2Per campaign, decide: keep Display (Low + chosen %), keep today's behavior (Low + 50%), or cut it (0% or off)HighMedium
3For tCPA/tROAS campaigns not limited by budget, rely on allocation %, not priority labelsHighLow
4Flag Target Impression Share Search campaigns that use DisplayMediumLow
5Revisit Search partners with Low priority + a small allocation, or cap/cut itMediumLow
6Set account defaults per campaign type in each client account, then override sparinglyMediumMedium
7Monitor spend by network for two weeks after every changeMediumLow

FAQ

What is channel prioritization in Google Ads? It's a setting that lets you mark channels such as Google Search, Search partners, the Google Display Network, or "Google channels" in PMax and Demand Gen as High or Low priority. Google funds High priority channels first and sends remaining budget to Low priority channels.

Does setting a channel to Low priority stop it from spending? No. Low priority channels still get budget that High priority channels can't use. To limit spend, set a budget allocation percentage. Google says a 0% allocation means it won't spend on that channel.

Why didn't channel prioritization change my spend? Google says channel prioritization has no effect when a campaign isn't limited by budget. That's common for Target CPA or Target ROAS campaigns. In that case, only the budget allocation percentage you set on Low priority channels applies.

What happens to Display Expansion in February 2027? Starting February 2027, Search campaigns with Display Expansion enabled migrate automatically to channel prioritization and budget allocation, and spend between Search, Search partners and Display may shift. Google says setting the Display Network to Low priority with a 50% budget allocation keeps your current configuration.

Can I set channel prioritization from a manager account, Google Ads Editor or the API? Not from a manager account: Google says to set it in each client account or at the campaign level. Google Ads Editor 2.14 added support for channel prioritization and budget caps. Google's channel prioritization help page still lists Google Ads API support as coming soon.

Start your free investigation today

A scored case file for your Google Ads account in around 5 minutes.